Low Energy Cost Servo System Mould Injection Machine Manufacturer In China With New Design Tech Standard equipment: 1) Double cylinder balancing injections 2) High-torque oil-motor pre plasticizing 3) Five pivots minus relief angle, double toggles, machine hinge mold locking 4) Cabinet-type...
Why Choose Low Energy Cost Servo System Mould Injection Machine:
Can be installed programmable computer control, to achieve full line of intelligent.
Extrusion, high efficiency.
Using the famous server driver, especially the most efficient closed-loop computing solution.
Save 30% -80% of the energy, to bring you outstanding economic benefits.
Description for Servo System Mould Injection Machine:
Brief Introduction :
Adopting Europe technology,hydraulic unit adopts proportional pressure and flow control,the pressure and the speed can be adjusted,stable movement curve and gentle shock,the computer is imported from Industry family. The LCD displaying screen with high clarity has Chinese and English language to use. Close-loop PID temperature control with the advantage of high precision. The operating table of the injection moulding machine have two safety, one is machine safety, another is electrical safety, that ensures the operators’s safety.
Standard equipment :
1) Double cylinder balancing injections
2) High-torque oil-motor pre plasticizing
3) Five pivots minus relief angle, double toggles, machine hinge mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Component Parts:
Injection unit:
1) Four injection pressures and speeds with three additional pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection position, providing optimum. injection accuracy and control
6) Temperature control
7) Heating Status indication
Clamping unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine to provide easy access
Photos Show for Servo System Mould Injection Machine :
Technical Parameters:
Main specification of HXF158 | Screw A | Screw B | Screw C | Screw D | |
Injection Unit | |||||
Screw Diameter | mm | 38 | 42 | 45 | 48 |
Screw L/D Ratio | L/D | 24.3 | 22 | 20.5 | 19.2 |
Shot Volume (theoretical) | CM³ | 226 | 277 | 318 | 361 |
Injection Weight (PS) | g | 206 | 252 | 289 | 328 |
Injection Rate | g/s | 100 | 126 | 144 | 163 |
Plasticizing Capacity | g/s | 13 | 15 | 20 | 24 |
Injection Pressure | MPa | 248 | 203 | 177 | 155 |
Screw Speed | rpm | 200 | |||
Clamping Unit | |||||
Clamp Force | KN | 1580 | |||
Toggle Stroke | mm | 400 | |||
Max. Mold Height | mm | 500 | |||
Min. Mold Height | mm | 150 | |||
Space Between Tie Bars (W×H) | mm | 460X410 | |||
Ejector Force | KN | 33 | |||
Ejector Stroke | mm | 130 | |||
Ejector Numbers | n | 5 | |||
Others | |||||
Max Pump Pressure | MPa | 16 | |||
Pump Motor Power | kW | 15 | |||
Heater Power | kW | 10.05 | |||
Machine Dimension (L×W×H) | m | 5.0×1.32×1.93 | |||
Machine Weight | t | 4.5 | |||
Oil tank capacity | L | 253 |
Machine Component List :
No | Items | Origin/Brand |
1 | Controller | Taiwan Techmation 7 Color screen |
2 | Vane pump | America Sunny |
3 | Main Directional valve | America Vickers |
4 | Proportional valve | Taiwan Dofluid / HNC |
5 | Hydraulic Five-star motor | Italy Intermot / Zihyd |
6 | Core puller | One set |
7 | Linear transducer | America / France |
8 | Electric equipment | Japan Omron / Fuji |
9 | Lubrication | Automatic |
10 | Main airproofelement | Taiwan / Japan |
11 | Electric motor | Beijing / Zhongda |
Main Buying Procedures :
Enquiry: contact us by email, phone call, fax, Instant tools (Trademanager, MSN, Skype) and let us know your enquiry.
Discussion: specify the items you desire, confirm specification; OEM/ODM consultation.
Quotation: Prices offered and accepted.
Place order as per contract or discussion.
Proforma invoice: offered to double confirm the order for both-side records.
Payment settled.
Order completed under our arrangement.
Goods shipped as per contracted term.
Goods arrive at local port or warehouse, depending on contracted term.
We warmly welcome all the clients send quotation to us,upon you send the quotation,i will reply you in 24 hours.
Previous: PET Bottle Labeling Machine